https://community.hpe.com/t5/storeeasy-storage/hard-drive-read-error-after-encryption/m-p/840129#M1574 I encrypted my 60gig pool of the 160gig hard drive on the HPNAS 3 in 1 docking station, after one full day the pool was still encrypting and indicating that there is a hard drive read error. The message also indicated that it is a hardware error. After disconnecting and reconnecting power as advised by the error message the error was still there. The error later disappeared after deleting the pool and recreating it.<BR /> Since then the docking station has been working well. What might have caused this disk error? if it was truly a hardware problem is it likely to appear again? Thu, 13 Sep 2007 07:16:01 GMT Blessing Mahomva 2007-09-13T07:16:01Z https://community.hpe.com/t5/storeeasy-storage/hard-drive-read-error-after-encryption/m-p/840129#M1574 I encrypted my 60gig pool of the 160gig hard drive on the HPNAS 3 in 1 docking station, after one full day the pool was still encrypting and indicating that there is a hard drive read error. The message also indicated that it is a hardware error. After disconnecting and reconnecting power as advised by the error message the error was still there. The error later disappeared after deleting the pool and recreating it.<BR /> Since then the docking station has been working well. What might have caused this disk error? if it was truly a hardware problem is it likely to appear again? Thu, 13 Sep 2007 07:16:01 GMT https://community.hpe.com/t5/storeeasy-storage/hard-drive-read-error-after-encryption/m-p/840129#M1574 Blessing Mahomva 2007-09-13T07:16:01Z