https://community.hpe.com/t5/storeeasy-storage/aio400-storageworks-server/m-p/4127617#M2874 1 TB drives? Those are not HP, so not supported<BR />The AiO400 is sold as a preconfigured system (hardware and software), you cannot modify components on it. It's sold and supported with 4 x 250GB drives.<BR />Also, like many NAS products from HP, the storage is configured as RAID 5 across all drives. The restore DVD expects to find a certain hardware configuration (controller, disks, BIOS). Fri, 11 Jan 2008 07:33:57 GMT Víctor Cespón 2008-01-11T07:33:57Z https://community.hpe.com/t5/storeeasy-storage/aio400-storageworks-server/m-p/4127616#M2873 I have a AIO400 Storageworks Server and just replaced all four drives with bigger ones (2 x 500GB + 2 x 1TB). I have configured the RAID, but it does not recongnize a C: drive? Any help would be great. When I run the intial installation disk again it goes to RAMDISK and won't recognize the drives. Thu, 10 Jan 2008 22:38:03 GMT https://community.hpe.com/t5/storeeasy-storage/aio400-storageworks-server/m-p/4127616#M2873 Marvin R Campbell 2008-01-10T22:38:03Z https://community.hpe.com/t5/storeeasy-storage/aio400-storageworks-server/m-p/4127617#M2874 1 TB drives? Those are not HP, so not supported<BR />The AiO400 is sold as a preconfigured system (hardware and software), you cannot modify components on it. It's sold and supported with 4 x 250GB drives.<BR />Also, like many NAS products from HP, the storage is configured as RAID 5 across all drives. The restore DVD expects to find a certain hardware configuration (controller, disks, BIOS). Fri, 11 Jan 2008 07:33:57 GMT https://community.hpe.com/t5/storeeasy-storage/aio400-storageworks-server/m-p/4127617#M2874 Víctor Cespón 2008-01-11T07:33:57Z