AIO error configuring a User Defined Application

Andrew at SMIL — Tue, 21 Apr 2015 07:54:44 GMT

Hello all. Thanks in advance.

I receive the below error when trying to setup a iSCSI target on our HP All-in-one 600 system at the step, "Enter an Application Server Name or IP Address"

Unable to communicate with server (Unable to connect to remote server 'x.x.x.x': No connection could be made because the target
machine actively refused it)

Attached is a screen shot of the error. No events seem to correspond with this error. There are no firewalls running on this machine or the target machine. I am logged into this machine as a user with rights to both host and target.

Thanks again,

Andrew

P.S. This thread has been moved from general to Network Attached Storage (NAS) (Small and Medium Business). - Hp Forum moderator

Re: AIO error configuring a User Defined Application

Andrew at SMIL — Fri, 23 Nov 2007 13:00:23 GMT

The "fix" was to simply follow the directions and install the HP agent on the client machine prior to setting up the user-defined application.

Thanks,

Andrew

Re: AIO error configuring a User Defined Application

Andrew at SMIL — Fri, 23 Nov 2007 13:00:51 GMT

RTFM.

topic AIO error configuring a User Defined Application in StoreEasy Storage

AIO error configuring a User Defined Application

Re: AIO error configuring a User Defined Application

Re: AIO error configuring a User Defined Application