https://community.hpe.com/t5/storeeasy-storage/getting-started-with-ilo/m-p/6810095#M3890 <P>According to the quickspec</P><P>&nbsp;</P><P><A href="http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111444.pdf" target="_blank">http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111444.pdf</A></P><P>&nbsp;</P><P>you have a dedicated ILO port, did you connect a cable there?</P><P>Or did you configure ILO for shared port?</P> Tue, 10 Nov 2015 13:46:31 GMT Torsten. 2015-11-10T13:46:31Z https://community.hpe.com/t5/storeeasy-storage/getting-started-with-ilo/m-p/6810066#M3889 <P>Hello</P><P>Confused!</P><P>I have a HP StoreEasy 1040 Storage server, OS is Windows Stroage server 2012 standard.</P><P>My end goal is to access the server from outside via ILO/Console, in case OS crashes or something.</P><P>As now, i have only HP System management. have updated firmware on ILO to latest, configured HP Lights-Out Online Configuration utility (Set IP address on ILO) and connected ILO to a public IP address.</P><P>What steps do i need to do now? I tried typing ILO address in a local browser, but "The page could not be displayed"</P><P>What else do i need.</P> Tue, 10 Nov 2015 12:12:38 GMT https://community.hpe.com/t5/storeeasy-storage/getting-started-with-ilo/m-p/6810066#M3889 akselc 2015-11-10T12:12:38Z https://community.hpe.com/t5/storeeasy-storage/getting-started-with-ilo/m-p/6810095#M3890 <P>According to the quickspec</P><P>&nbsp;</P><P><A href="http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111444.pdf" target="_blank">http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111444.pdf</A></P><P>&nbsp;</P><P>you have a dedicated ILO port, did you connect a cable there?</P><P>Or did you configure ILO for shared port?</P> Tue, 10 Nov 2015 13:46:31 GMT https://community.hpe.com/t5/storeeasy-storage/getting-started-with-ilo/m-p/6810095#M3890 Torsten. 2015-11-10T13:46:31Z