https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014946#M1014 Have a MSL2024 tape Library, server does not see the Robotic Tape Library, but does see the tape drive. it will backup but will only allow to use one tape and not use the tape library. Tue, 14 Oct 2008 08:52:01 GMT Graham Attwell 2008-10-14T08:52:01Z https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014946#M1014 Have a MSL2024 tape Library, server does not see the Robotic Tape Library, but does see the tape drive. it will backup but will only allow to use one tape and not use the tape library. Tue, 14 Oct 2008 08:52:01 GMT https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014946#M1014 Graham Attwell 2008-10-14T08:52:01Z https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014947#M1015 Graham,<BR /><BR />Which software are you using? Check your cables and try updating any firmware or drivers.<BR /><BR />CT Wed, 15 Oct 2008 07:22:45 GMT https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014947#M1015 Caster Troy 2008-10-15T07:22:45Z https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014948#M1016 Software is Backup exec 12 All drivers and Fireware is upto Date. Wed, 15 Oct 2008 08:20:46 GMT https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014948#M1016 Graham Attwell 2008-10-15T08:20:46Z https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014949#M1017 All cables Check everything upto date.<BR /><BR />Still Backup exec can not see the Robotic Tape Library, I think this has something to do with the LUN 0 and 1, at present Server can only see LUN 0, does anyone know how to configure or do a LUN scan. Wed, 15 Oct 2008 10:52:39 GMT https://community.hpe.com/t5/automated-backup/robotic-tape-library/m-p/1014949#M1017 Graham Attwell 2008-10-15T10:52:39Z