https://community.hpe.com/t5/automated-backup/scsi-cable-specs/m-p/85397#M118 You can get the numbers from HP partsurfer:<BR /> <A href="http://partsurfer.hp.com/cgi-bin/spi/main" target="_blank" rel="nofollow">http://partsurfer.hp.com/cgi-bin/spi/main</A><BR /> <BR /> Type in C6280F for the product number, then pick cables or terminator for your keyword.<BR /> <BR /> This is a S.E. SCSI product with wide (68pin) HD connectors. You can use the HP jumper cable, or any standard shielded SCSI cable.<BR /> <BR /> You can connect SE devices to either a SE or LVDS HBA. <BR /> <BR /> Your host cable will be dependent on your host interface connector type. Wed, 24 Apr 2002 21:12:24 GMT CA713937 2002-04-24T21:12:24Z https://community.hpe.com/t5/automated-backup/scsi-cable-specs/m-p/85396#M117 I have recently found an HP SureStore Autoloader (C6280F), that our company has had for some time, but never used. I do not have the cables and need the specs to buy new ones. Anyone know the cable specs for all three needed (main SCSI cable to host, jumper cable, and terminator?) Wed, 24 Apr 2002 18:17:10 GMT https://community.hpe.com/t5/automated-backup/scsi-cable-specs/m-p/85396#M117 Randy Raitz_1 2002-04-24T18:17:10Z https://community.hpe.com/t5/automated-backup/scsi-cable-specs/m-p/85397#M118 You can get the numbers from HP partsurfer:<BR /> <A href="http://partsurfer.hp.com/cgi-bin/spi/main" target="_blank" rel="nofollow">http://partsurfer.hp.com/cgi-bin/spi/main</A><BR /> <BR /> Type in C6280F for the product number, then pick cables or terminator for your keyword.<BR /> <BR /> This is a S.E. SCSI product with wide (68pin) HD connectors. You can use the HP jumper cable, or any standard shielded SCSI cable.<BR /> <BR /> You can connect SE devices to either a SE or LVDS HBA. <BR /> <BR /> Your host cable will be dependent on your host interface connector type. Wed, 24 Apr 2002 21:12:24 GMT https://community.hpe.com/t5/automated-backup/scsi-cable-specs/m-p/85397#M118 CA713937 2002-04-24T21:12:24Z