https://community.hpe.com/t5/automated-backup/tape-reader-not-recognized/m-p/255904#M485 Hello,<BR /> <BR /> I want to perform an ignite backup by running make_tape_recovery but this fails because the tape reader is not recognized.<BR /> With ioscan, I can see it but as Unknown :<BR /> 10/0/15/0.3 target<BR /> 10/0/15/0.3.0 unknown HP C1537A<BR /> <BR /> make_tape_recovery ends by saying :<BR /> ERROR: Tape destination /dev/rmt/0mn is not found on the system.No such file<BR /> or directory (errno = 2)<BR /> ERROR: Check tape device failed.<BR /> <BR /> What shall I do ?<BR /> <BR /> Thanks,<BR /> Ced. Mon, 25 Aug 2003 13:19:06 GMT Cedric_8 2003-08-25T13:19:06Z https://community.hpe.com/t5/automated-backup/tape-reader-not-recognized/m-p/255904#M485 Hello,<BR /> <BR /> I want to perform an ignite backup by running make_tape_recovery but this fails because the tape reader is not recognized.<BR /> With ioscan, I can see it but as Unknown :<BR /> 10/0/15/0.3 target<BR /> 10/0/15/0.3.0 unknown HP C1537A<BR /> <BR /> make_tape_recovery ends by saying :<BR /> ERROR: Tape destination /dev/rmt/0mn is not found on the system.No such file<BR /> or directory (errno = 2)<BR /> ERROR: Check tape device failed.<BR /> <BR /> What shall I do ?<BR /> <BR /> Thanks,<BR /> Ced. Mon, 25 Aug 2003 13:19:06 GMT https://community.hpe.com/t5/automated-backup/tape-reader-not-recognized/m-p/255904#M485 Cedric_8 2003-08-25T13:19:06Z https://community.hpe.com/t5/automated-backup/tape-reader-not-recognized/m-p/255905#M486 Hi there.<BR /> Have you checked your cabling ( inlcuding termination on device or active terminator on end of cable or cables themselves ) ?<BR /> As long as your device is unknown and not CLAIMED, you won't have any success with ignite tape.<BR /> Rgds<BR /> Alexander M. Ermes<BR /> Tue, 26 Aug 2003 05:41:38 GMT https://community.hpe.com/t5/automated-backup/tape-reader-not-recognized/m-p/255905#M486 BR19682 2003-08-26T05:41:38Z