https://community.hpe.com/t5/automated-backup/c1553a-autoloader-magazine-ejecting/m-p/325440#M585 Ok, only as an information for other with the same problem:<BR /><BR />Problem is solved. The autoloader magazine turning mechanism had to be cleaned.<BR />I opened the external case, and with a cloth cleaned and greased the big gear turning the mazine.<BR />Since then, everything works fine Again.<BR /><BR />Arno Tue, 07 Sep 2004 15:05:01 GMT CA1092640 2004-09-07T15:05:01Z https://community.hpe.com/t5/automated-backup/c1553a-autoloader-magazine-ejecting/m-p/325439#M584 Hi,<BR />I've got a DDS2 autoloader. Since yesterday, it ejects the magazine whenever I insert one.<BR /><BR />I've tried two magazines, both with unlabeled cartridges, the magazines themselves are also without any labels.<BR /><BR />The changer checks the first slots: 6, 5, 4, then the message 'unloading', followed by 'ejecting' is given.<BR /><BR />This also happens when the device is not connected to the SCSI bus.<BR /><BR />The ltt tools give no error, although obviously I can't actually check the changer...<BR /><BR />Does anybody know what might be the reason for this error?<BR /><BR />Tia,<BR /><BR />Arno Fri, 27 Feb 2004 06:52:13 GMT https://community.hpe.com/t5/automated-backup/c1553a-autoloader-magazine-ejecting/m-p/325439#M584 CA1092640 2004-02-27T06:52:13Z https://community.hpe.com/t5/automated-backup/c1553a-autoloader-magazine-ejecting/m-p/325440#M585 Ok, only as an information for other with the same problem:<BR /><BR />Problem is solved. The autoloader magazine turning mechanism had to be cleaned.<BR />I opened the external case, and with a cloth cleaned and greased the big gear turning the mazine.<BR />Since then, everything works fine Again.<BR /><BR />Arno Tue, 07 Sep 2004 15:05:01 GMT https://community.hpe.com/t5/automated-backup/c1553a-autoloader-magazine-ejecting/m-p/325440#M585 CA1092640 2004-09-07T15:05:01Z