https://community.hpe.com/t5/automated-backup/storageworks-1280-dlt1-and-ntbackup/m-p/414077#M647 Is anyone else running a StorageWorks 1280 DLT1 Autoloader with NTBackup. If so, what firmware versions are you successfully running?<BR />I've updated to the most recent firmware versions, V.63 for drive, V.40 for the loader, and NTBackup will only backup. Whenever I try a restore (verification purposes), it proceeds to mount the tape, but then announces 'Cannot detect the selected backup device' yet it's managed to successfully mount the required tape. This also happens when a backup through the UI is performed, yet not when scheduled. Any ideas why?<BR />Any help would be greatly appreciated. Thu, 12 Aug 2004 07:42:45 GMT CA1169567 2004-08-12T07:42:45Z https://community.hpe.com/t5/automated-backup/storageworks-1280-dlt1-and-ntbackup/m-p/414077#M647 Is anyone else running a StorageWorks 1280 DLT1 Autoloader with NTBackup. If so, what firmware versions are you successfully running?<BR />I've updated to the most recent firmware versions, V.63 for drive, V.40 for the loader, and NTBackup will only backup. Whenever I try a restore (verification purposes), it proceeds to mount the tape, but then announces 'Cannot detect the selected backup device' yet it's managed to successfully mount the required tape. This also happens when a backup through the UI is performed, yet not when scheduled. Any ideas why?<BR />Any help would be greatly appreciated. Thu, 12 Aug 2004 07:42:45 GMT https://community.hpe.com/t5/automated-backup/storageworks-1280-dlt1-and-ntbackup/m-p/414077#M647 CA1169567 2004-08-12T07:42:45Z