https://community.hpe.com/t5/automated-backup/tl891-fault-code-3100-picker-jammed/m-p/533536#M699 Anyone know how to fix this?<BR /> <BR /> I've tried re-initializing, powering down, checked to make sure nothing is jammed, etc. but every time during POST, the picker will jam while inventoring a slot of the magazine, or, if no magazine is present, will just stop at the end of it's run.<BR /> <BR /> Kinda weird. Is this a serious issue or something that can be resolved easily? Any help is appreciated. Thanks Tue, 24 May 2005 14:04:05 GMT Mark Johnson5000 2005-05-24T14:04:05Z https://community.hpe.com/t5/automated-backup/tl891-fault-code-3100-picker-jammed/m-p/533536#M699 Anyone know how to fix this?<BR /> <BR /> I've tried re-initializing, powering down, checked to make sure nothing is jammed, etc. but every time during POST, the picker will jam while inventoring a slot of the magazine, or, if no magazine is present, will just stop at the end of it's run.<BR /> <BR /> Kinda weird. Is this a serious issue or something that can be resolved easily? Any help is appreciated. Thanks Tue, 24 May 2005 14:04:05 GMT https://community.hpe.com/t5/automated-backup/tl891-fault-code-3100-picker-jammed/m-p/533536#M699 Mark Johnson5000 2005-05-24T14:04:05Z