https://community.hpe.com/t5/automated-backup/surestore-dat-24x6-dds-3-not-recognized-by-backupexec-8-0/m-p/75793#M71 I've figured this out. Turns out my SCSI adapter didn't have a LUN enabled. Had to go into the SCSI bios and do it manually. Not that they documented any of that anywhere, mind you. Thu, 21 Mar 2002 15:28:01 GMT CA766775 2002-03-21T15:28:01Z https://community.hpe.com/t5/automated-backup/surestore-dat-24x6-dds-3-not-recognized-by-backupexec-8-0/m-p/75792#M70 It sees it as a single tape and doesn't recognize the changer. I've been emailing with them about the problem and I've identified an area where two registry keys that they say should match don't. Unfortunately, they can't seem to provide me with the location of the fix. Has anyone else had this problem? Is there an HP driver that solves this problem?<BR /> Thanks! Thu, 21 Mar 2002 13:24:15 GMT https://community.hpe.com/t5/automated-backup/surestore-dat-24x6-dds-3-not-recognized-by-backupexec-8-0/m-p/75792#M70 CA766775 2002-03-21T13:24:15Z https://community.hpe.com/t5/automated-backup/surestore-dat-24x6-dds-3-not-recognized-by-backupexec-8-0/m-p/75793#M71 I've figured this out. Turns out my SCSI adapter didn't have a LUN enabled. Had to go into the SCSI bios and do it manually. Not that they documented any of that anywhere, mind you. Thu, 21 Mar 2002 15:28:01 GMT https://community.hpe.com/t5/automated-backup/surestore-dat-24x6-dds-3-not-recognized-by-backupexec-8-0/m-p/75793#M71 CA766775 2002-03-21T15:28:01Z