https://community.hpe.com/t5/automated-backup/tl891-dlx-fault-code-6037/m-p/585921#M728 I am having a hardware error on my backup software and the library is giving me a fault code of 6037. I have not been able to locate the problem or find out what the fault code means. Any help would be greatly appreciated.<BR /> <BR /> Thanks Wed, 02 Nov 2005 11:33:47 GMT JD Tatom 2005-11-02T11:33:47Z https://community.hpe.com/t5/automated-backup/tl891-dlx-fault-code-6037/m-p/585921#M728 I am having a hardware error on my backup software and the library is giving me a fault code of 6037. I have not been able to locate the problem or find out what the fault code means. Any help would be greatly appreciated.<BR /> <BR /> Thanks Wed, 02 Nov 2005 11:33:47 GMT https://community.hpe.com/t5/automated-backup/tl891-dlx-fault-code-6037/m-p/585921#M728 JD Tatom 2005-11-02T11:33:47Z https://community.hpe.com/t5/automated-backup/tl891-dlx-fault-code-6037/m-p/585922#M729 The FSC "6037" is listed only as "Command Timeout" under the intermodule (6xxx) FSC codes. The recovery procedure is limited to rebooting and lists a possible cause as the library controller board. That's all that documented for this in the service manual.<BR /><BR />Did anything change with the library that triggered this error to occur? Wed, 02 Nov 2005 16:37:45 GMT https://community.hpe.com/t5/automated-backup/tl891-dlx-fault-code-6037/m-p/585922#M729 CA713937 2005-11-02T16:37:45Z