https://community.hpe.com/t5/automated-backup/storageworks-ultrium-1-8-autoloader/m-p/660632#M781 I have just installed a Storageworks Ultrium 1/8 Autoloader. I have succesfully imported my media and am able to complete a backup from Veritas BE if I manually load a tape. I have set the Autoloader to Loop and Autoload Mode but if I do not manually load a tape into the drive a BE Backup fails with a no media error. The Autoloader shows up under Standalone devices in BE. I havw downloaded all the latest driveers from the HP site but no joy<BR /> <BR /> Any ideas?<BR /> <BR /> Thanks in advance Fri, 26 May 2006 06:48:24 GMT Sarah Warden-Smith 2006-05-26T06:48:24Z https://community.hpe.com/t5/automated-backup/storageworks-ultrium-1-8-autoloader/m-p/660632#M781 I have just installed a Storageworks Ultrium 1/8 Autoloader. I have succesfully imported my media and am able to complete a backup from Veritas BE if I manually load a tape. I have set the Autoloader to Loop and Autoload Mode but if I do not manually load a tape into the drive a BE Backup fails with a no media error. The Autoloader shows up under Standalone devices in BE. I havw downloaded all the latest driveers from the HP site but no joy<BR /> <BR /> Any ideas?<BR /> <BR /> Thanks in advance Fri, 26 May 2006 06:48:24 GMT https://community.hpe.com/t5/automated-backup/storageworks-ultrium-1-8-autoloader/m-p/660632#M781 Sarah Warden-Smith 2006-05-26T06:48:24Z https://community.hpe.com/t5/automated-backup/storageworks-ultrium-1-8-autoloader/m-p/660633#M782 Do you have the autoloader set in sequential mode? "Loop" and "Autoload" modes only are options for how to behave when in sequential mode.<BR /><BR />The sequential mode is under "Configuration" -&gt; "Library Behavior" -&gt; "Set Library Mode" Wed, 31 May 2006 15:59:14 GMT https://community.hpe.com/t5/automated-backup/storageworks-ultrium-1-8-autoloader/m-p/660633#M782 Curtis Ballard 2006-05-31T15:59:14Z