https://community.hpe.com/t5/appliance-servers/sa8200-netstructure-ftp-problems/m-p/248017#M749 I cannot get ftp traffic to pass through the appliance. I have a simple config of one plicygroup, http service and ftp service. For ftp I have source ip and sap enabled, and I am trying to connect from a machine not on the same subnet. I just get connection refused or timeout messages when trying to connect. On the server behind the sa8200, the ftp log says the client disconnected. Is there anything special I have to do for ftp to work? Mon, 28 Jul 2003 13:42:58 GMT Brian Fisk 2003-07-28T13:42:58Z https://community.hpe.com/t5/appliance-servers/sa8200-netstructure-ftp-problems/m-p/248017#M749 I cannot get ftp traffic to pass through the appliance. I have a simple config of one plicygroup, http service and ftp service. For ftp I have source ip and sap enabled, and I am trying to connect from a machine not on the same subnet. I just get connection refused or timeout messages when trying to connect. On the server behind the sa8200, the ftp log says the client disconnected. Is there anything special I have to do for ftp to work? Mon, 28 Jul 2003 13:42:58 GMT https://community.hpe.com/t5/appliance-servers/sa8200-netstructure-ftp-problems/m-p/248017#M749 Brian Fisk 2003-07-28T13:42:58Z https://community.hpe.com/t5/appliance-servers/sa8200-netstructure-ftp-problems/m-p/248018#M750 Don't forget to add a route in your router for getting to your netstructure server side network through the network side ip address of the netstructure. Once I did this, everything worked.<BR /> <BR /> Thu, 31 Jul 2003 12:50:47 GMT https://community.hpe.com/t5/appliance-servers/sa8200-netstructure-ftp-problems/m-p/248018#M750 Brian Fisk 2003-07-31T12:50:47Z