https://community.hpe.com/t5/proliant-servers-netservers/netserver-lh3/m-p/108117#M1130 Dear All,<BR /> <BR /> I am going to upgrade my Netserver LH3 Disks.<BR /> <BR /> Curently I have:<BR /> <BR /> 3 X 18.2 GB SCSI drive on the mass storage shelve.<BR /> <BR /> Questions:<BR /> <BR /> Can I use non HP SCSI Drives?<BR /> Can the Integrated HP NetRAID supports expansion of my current RAID 5?<BR /> Can i still add another array of RAID five having two RAID 5?<BR /> <BR /> Can I use disks which are more that 18.2 Gb?<BR /> <BR /> thank you very much in advance. Fri, 12 Jul 2002 04:58:52 GMT Eduardo Banzuela 2002-07-12T04:58:52Z https://community.hpe.com/t5/proliant-servers-netservers/netserver-lh3/m-p/108117#M1130 Dear All,<BR /> <BR /> I am going to upgrade my Netserver LH3 Disks.<BR /> <BR /> Curently I have:<BR /> <BR /> 3 X 18.2 GB SCSI drive on the mass storage shelve.<BR /> <BR /> Questions:<BR /> <BR /> Can I use non HP SCSI Drives?<BR /> Can the Integrated HP NetRAID supports expansion of my current RAID 5?<BR /> Can i still add another array of RAID five having two RAID 5?<BR /> <BR /> Can I use disks which are more that 18.2 Gb?<BR /> <BR /> thank you very much in advance. Fri, 12 Jul 2002 04:58:52 GMT https://community.hpe.com/t5/proliant-servers-netservers/netserver-lh3/m-p/108117#M1130 Eduardo Banzuela 2002-07-12T04:58:52Z https://community.hpe.com/t5/proliant-servers-netservers/netserver-lh3/m-p/108118#M1131 1. It is possible, but not supported by HP.<BR /> 2. Yes, expansion is possible with the onboard controller of the LH3.<BR /> 3. You can have up to 8 arrays with the controller in the system.<BR /> 4. Yes you can use larger HDDs. I would recommend adding a new array if you plan on using larger HDDs. Fri, 12 Jul 2002 14:32:01 GMT https://community.hpe.com/t5/proliant-servers-netservers/netserver-lh3/m-p/108118#M1131 CA660377 2002-07-12T14:32:01Z