https://community.hpe.com/t5/proliant-servers-netservers/netraid-will-not-recognize-drives/m-p/684820#M11732 <!--!*#-->I recently picked up a LH Pro 6/200.<BR /> It contains a single PPro 200, 96 Meg of ram and 3 - 4.2G Quantum HD's.<BR /> <BR /> The problem is that the netraid card does not seem to see the drives. If I connect the drive cage to the onboard adaptec, it indicates the drives are available, but the netraid card never shows them. I have tried all three ports of the netraid. I ahve verified the switch settings. The ID's are set for 1,2,3,4,5,6. Upper and lower cage settings are correct.<BR /> <BR /> I have reset the netraid to defaults, and tried several settings to no avail. If I put the SCSI cdrom on the netraid, it shows up as ID 5. The card must work, but never sees the drives.<BR /> <BR /> I have tried all 3 drives as singles and several combinations of drives/slots. Nothing changes.<BR /> <BR /> Any help on this would be appreciated.<BR /> <BR /> Thanks in advance, <BR /> Bill Tue, 08 Aug 2006 22:30:20 GMT BIll Deslippe 2006-08-08T22:30:20Z https://community.hpe.com/t5/proliant-servers-netservers/netraid-will-not-recognize-drives/m-p/684820#M11732 <!--!*#-->I recently picked up a LH Pro 6/200.<BR /> It contains a single PPro 200, 96 Meg of ram and 3 - 4.2G Quantum HD's.<BR /> <BR /> The problem is that the netraid card does not seem to see the drives. If I connect the drive cage to the onboard adaptec, it indicates the drives are available, but the netraid card never shows them. I have tried all three ports of the netraid. I ahve verified the switch settings. The ID's are set for 1,2,3,4,5,6. Upper and lower cage settings are correct.<BR /> <BR /> I have reset the netraid to defaults, and tried several settings to no avail. If I put the SCSI cdrom on the netraid, it shows up as ID 5. The card must work, but never sees the drives.<BR /> <BR /> I have tried all 3 drives as singles and several combinations of drives/slots. Nothing changes.<BR /> <BR /> Any help on this would be appreciated.<BR /> <BR /> Thanks in advance, <BR /> Bill Tue, 08 Aug 2006 22:30:20 GMT https://community.hpe.com/t5/proliant-servers-netservers/netraid-will-not-recognize-drives/m-p/684820#M11732 BIll Deslippe 2006-08-08T22:30:20Z