https://community.hpe.com/t5/proliant-servers-netservers/my-netserver-e60/m-p/688471#M11798 Hi John,<BR /><BR />The first thing you need to do when you see this problem is clear the CMOS. On POST, when it says "Press F2 to enter setup", press the <F11> key instead. From the CMOS, go to the Exit page and choose "Clear System Configuration and exit setup." After a few seconds it will reboot. This time, choose <F2> instead and go back into the CMOS. From there, press <F9> to load defaults and then save/exit.<BR /><BR />Try that first and let us know how it goes. If not, we'll try something else.<BR /><BR />Good luck,<BR /><BR />Sean T. Craig Sr. C.E.T., M.C.P.<BR /><BR />P.S. If this information is useful, please be sure to assign points rating it's value.<BR /><BR /></F9></F2></F11> Sat, 19 Aug 2006 07:20:44 GMT Sean T. Craig 2006-08-19T07:20:44Z https://community.hpe.com/t5/proliant-servers-netservers/my-netserver-e60/m-p/688470#M11797 this is my first post so be gentle :.)<BR /> i was given a E60 net server a while back and i installed windows xp onto a harddrive i put into it and everything was fine,until i received another computer and put everything back into it,last night i put the hard drive and ram back into the server and now it boots up the bios alright but will not go into windows<BR /> the screen is black with a little flasing icon in the top left corner .has anyone got any idea what is wrong <BR /> i will give more info if required<BR /> thanks in advance<BR /> Fri, 18 Aug 2006 21:22:57 GMT https://community.hpe.com/t5/proliant-servers-netservers/my-netserver-e60/m-p/688470#M11797 john mc 2006-08-18T21:22:57Z https://community.hpe.com/t5/proliant-servers-netservers/my-netserver-e60/m-p/688471#M11798 Hi John,<BR /><BR />The first thing you need to do when you see this problem is clear the CMOS. On POST, when it says "Press F2 to enter setup", press the <F11> key instead. From the CMOS, go to the Exit page and choose "Clear System Configuration and exit setup." After a few seconds it will reboot. This time, choose <F2> instead and go back into the CMOS. From there, press <F9> to load defaults and then save/exit.<BR /><BR />Try that first and let us know how it goes. If not, we'll try something else.<BR /><BR />Good luck,<BR /><BR />Sean T. Craig Sr. C.E.T., M.C.P.<BR /><BR />P.S. If this information is useful, please be sure to assign points rating it's value.<BR /><BR /></F9></F2></F11> Sat, 19 Aug 2006 07:20:44 GMT https://community.hpe.com/t5/proliant-servers-netservers/my-netserver-e60/m-p/688471#M11798 Sean T. Craig 2006-08-19T07:20:44Z