https://community.hpe.com/t5/proliant-servers-netservers/cant-access-bios-after-bios-admin-password-is-set/m-p/751973#M12767 Hello,<BR /><BR />I had the same issue and i just find out that it was because the password set was more than 7 letters...<BR /><BR />Example, i entered ThisIsMyServerPassword and the system saved ThisIsd as setup password (6 first letters and then the last typed)<BR /><BR />hope it helps<BR /><BR />bye Wed, 04 Apr 2007 05:08:56 GMT Vincent CARVALHO 2007-04-04T05:08:56Z https://community.hpe.com/t5/proliant-servers-netservers/cant-access-bios-after-bios-admin-password-is-set/m-p/751972#M12766 working on the DL380 G5 and just set up the bios admin password, reboot the server and tried to enter the bios. I cannot get in and had to reset it via the board. Every time I set the bios admin password, it refuses me access saying password incorrect even though I have typed in the correct password. <BR /> Is there any step I am missing or is this a problem with dl380 g5? Mon, 12 Feb 2007 06:59:39 GMT https://community.hpe.com/t5/proliant-servers-netservers/cant-access-bios-after-bios-admin-password-is-set/m-p/751972#M12766 omas asen 2007-02-12T06:59:39Z https://community.hpe.com/t5/proliant-servers-netservers/cant-access-bios-after-bios-admin-password-is-set/m-p/751973#M12767 Hello,<BR /><BR />I had the same issue and i just find out that it was because the password set was more than 7 letters...<BR /><BR />Example, i entered ThisIsMyServerPassword and the system saved ThisIsd as setup password (6 first letters and then the last typed)<BR /><BR />hope it helps<BR /><BR />bye Wed, 04 Apr 2007 05:08:56 GMT https://community.hpe.com/t5/proliant-servers-netservers/cant-access-bios-after-bios-admin-password-is-set/m-p/751973#M12767 Vincent CARVALHO 2007-04-04T05:08:56Z