topic SCSI Event Viewer Error in ProLiant Servers - Netservers

SCSI Event Viewer Error

Mike Cronan — Mon, 29 Oct 2001 14:24:25 GMT

I have a Netserver E800 running Windows 2000.
Periodically, I receive the following error in the event viewer:

The device, \Device\Scsi\mraid35x1, did not respond within the timeout period.

The HD seems to be OK otherwise. Does anyone know what may be causing this error.

Re: SCSI Event Viewer Error

Mon, 29 Oct 2001 20:12:08 GMT

Hi Mike,

Unfortunately, I could not find a single bit of data on the error message you specified. I did, however, find quite a bit of updates available, depending on the drive you have installed. Can you provide more details on the specific drive? (part number?)

I am assuming this is the only symptom you see... and it's working just fine nonetheless...

Thanks!

Rex

Re: SCSI Event Viewer Error

Iva Hall — Tue, 30 Oct 2001 15:13:24 GMT

Hello Mike,

It sounds like you're getting an event 9 error? I found a Microsoft kb that might help you.

http://support.microsoft.com/support/kb/articles/Q154/6/90.asp

Iva

Re: SCSI Event Viewer Error

BR660991 — Wed, 23 Jan 2002 12:06:22 GMT

Hello,

I would like to have more info about your system.
Is there a Netraid controleur installed and if yes what is the model of this raid adapter.

Did you install W2K with the HP netserver navigator.

If there is a Netraid adapter other than Netraid 4M, Netraid 1M or Netraid 2M the revision of the Driver mraid35x.sys should be Version 2.66.

I case of the netraid adapter is a Netraid 4M, Netriad 1M, Netraid 2M or no Netraid adapter in your system, just remove the driver mraid35x.sys.

If the netraid adapter is a Netraid 1M or netraid 2M, the dirver you have to use is MRAID2K.SYS version 5.20.

For the netriad 4M the drivers are:
HPNCOMM.SYS 2.4.1.4605 1.89KB
HPNDISK.SYS 2.4.1.4605 1.89KB
HPNSCSI.SYS 2.4.1.4605 68.2KB
HPN.SYS 2.4.1.4605 25.2KB
HPNPORT.SYS 2.4.1.4605 1.89KB .

I Hope this will help.