https://community.hpe.com/t5/proliant-servers-netservers/dl385-g2-embedded-nic-pxe-boot/m-p/787542#M13252 Hi,<BR /> we have to install DL385G2 with two NC360T and the embdded NIC with PXE boot.<BR /> As soon as i insert two NC360T the embedded Nic disappears from the boot IPL list and the new inserted NIC will be visible .<BR /> <BR /> PXE boot not possible at this time from the embedded nic !<BR /> <BR /> The IPL boot list only shows 8 devices.<BR /> <BR /> After disabling this two NC360T ,the embedded nics is visible again in the boot IPL and pxe boot is possible with the embedded nic. Wed, 09 May 2007 07:18:37 GMT BR759511 2007-05-09T07:18:37Z https://community.hpe.com/t5/proliant-servers-netservers/dl385-g2-embedded-nic-pxe-boot/m-p/787542#M13252 Hi,<BR /> we have to install DL385G2 with two NC360T and the embdded NIC with PXE boot.<BR /> As soon as i insert two NC360T the embedded Nic disappears from the boot IPL list and the new inserted NIC will be visible .<BR /> <BR /> PXE boot not possible at this time from the embedded nic !<BR /> <BR /> The IPL boot list only shows 8 devices.<BR /> <BR /> After disabling this two NC360T ,the embedded nics is visible again in the boot IPL and pxe boot is possible with the embedded nic. Wed, 09 May 2007 07:18:37 GMT https://community.hpe.com/t5/proliant-servers-netservers/dl385-g2-embedded-nic-pxe-boot/m-p/787542#M13252 BR759511 2007-05-09T07:18:37Z https://community.hpe.com/t5/proliant-servers-netservers/dl385-g2-embedded-nic-pxe-boot/m-p/787543#M13253 You may be able to correct this by adjusting the boot order in the RBSU (ROM-Based Setup Utility) by pressing the F9 key during POST. Thu, 10 May 2007 08:22:13 GMT https://community.hpe.com/t5/proliant-servers-netservers/dl385-g2-embedded-nic-pxe-boot/m-p/787543#M13253 Kedd Guyton 2007-05-10T08:22:13Z