https://community.hpe.com/t5/proliant-servers-netservers/loading-ftdi-usb-drivers-causes-dl360-server-to-crash/m-p/848243#M14200 Whenever I try to load the drivers from FTDI when I have more than one FTDI USB device downstream of any generic USB Hub, the Server crashes to blue screen. The SetupAPI.Log file shows the crash occurring just after the <BR />#I123 Doing full install of "USB\VID_0403&amp;PID_6001\A20E1C7P".<BR />information line. Can anyone tell me what the OS is doing with the driver file at this point? Is this a problem with the HP Host Controller? Can anything in the FTDI driver cause the server to Blue Screen?<BR />When I plug the same arrangement into the HUB one device at a time, it works fine. Tue, 02 Oct 2007 15:23:29 GMT Don Ransbury 2007-10-02T15:23:29Z https://community.hpe.com/t5/proliant-servers-netservers/loading-ftdi-usb-drivers-causes-dl360-server-to-crash/m-p/848243#M14200 Whenever I try to load the drivers from FTDI when I have more than one FTDI USB device downstream of any generic USB Hub, the Server crashes to blue screen. The SetupAPI.Log file shows the crash occurring just after the <BR />#I123 Doing full install of "USB\VID_0403&amp;PID_6001\A20E1C7P".<BR />information line. Can anyone tell me what the OS is doing with the driver file at this point? Is this a problem with the HP Host Controller? Can anything in the FTDI driver cause the server to Blue Screen?<BR />When I plug the same arrangement into the HUB one device at a time, it works fine. Tue, 02 Oct 2007 15:23:29 GMT https://community.hpe.com/t5/proliant-servers-netservers/loading-ftdi-usb-drivers-causes-dl360-server-to-crash/m-p/848243#M14200 Don Ransbury 2007-10-02T15:23:29Z