topic Re: Cannot Procede to install OS in Smart Start after array config in ProLiant Servers - Netservers

Cannot Procede to install OS in Smart Start after array config

TIMOTHY CARLISLE — Tue, 26 Aug 2008 20:21:31 GMT

I am trying to use the Smart Start utility to configure the arrays and load the OS on a new DL320s server. I have configured the arrays but when I proceed to "Deploy" the OS, and click continue, nothing happens. Boot controllr disk size is showinf -1 mb in the Server Deployment Hardware Configuraton after configuring the arrays. Is there a wait time after array and logical drive configuration or have I missed a step?

Re: Cannot Procede to install OS in Smart Start after array config

Prem Selvam Arumugam — Mon, 01 Sep 2008 15:50:59 GMT

Timothy

Did you tried to configure the array by pressing ctrl+S while booting

Please check may be some times Array controller error

Re: Cannot Procede to install OS in Smart Start after array config

TIMOTHY CARLISLE — Tue, 16 Sep 2008 14:03:25 GMT

I just went to plan B, load the OS, which I did not want to do. Now I have to load the drivers from Windows. All went well withthat except for the network adapter configuration whaic I am working on now.