https://community.hpe.com/t5/proliant-servers-netservers/server/m-p/1029205#M15810 how to configure mirror inhp ml 150 server Tue, 18 Nov 2008 06:20:11 GMT paras sharma 2008-11-18T06:20:11Z https://community.hpe.com/t5/proliant-servers-netservers/server/m-p/1029205#M15810 how to configure mirror inhp ml 150 server Tue, 18 Nov 2008 06:20:11 GMT https://community.hpe.com/t5/proliant-servers-netservers/server/m-p/1029205#M15810 paras sharma 2008-11-18T06:20:11Z https://community.hpe.com/t5/proliant-servers-netservers/server/m-p/1029206#M15811 The standard ml150 only has ultra320 storage controller, which has no raid capabilities of its own.<BR /><BR /><A href="http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00063764/c00063764.pdf" target="_blank" rel="nofollow">http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00063764/c00063764.pdf</A><BR />Ultra-320 SCSI Channel A<BR />up to 15 *<BR />Control of up to 15 external SCSI devices<BR />Ultra-320 SCSI Channel B<BR />up to 5*<BR />Up to 5 SCSI hard drives (addresses = ID 0, 1, 2, 3, 8)<BR />Embedded SCSI controller (address = ID 7)<BR /><BR />Unless you added another controller you cant't configure any mirroring within the hardware.<BR /><BR />After installing Windows you can use disk-management to "upgrade" the system disk to a dynamic disk, and you can configure software mirroring to another disk. Wed, 19 Nov 2008 07:31:33 GMT https://community.hpe.com/t5/proliant-servers-netservers/server/m-p/1029206#M15811 Pieter 't Hart 2008-11-19T07:31:33Z