https://community.hpe.com/t5/proliant-servers-netservers/smart-array-disk-move/m-p/1058282#M16489 I have a proliant ML350 G4 with two disks configured in raid 1 with an smart array that is broken. Can I put this disks in a proliant DL380 with an smart array? The problem is that i will put the disks in another positions (on the original server are on 0 and 1 position, and i will put this in the new server on positions 2 and 3), just to start with the operating system of the dl380 and to make a emergency recoger of the data of the other server. Wed, 18 Feb 2009 14:11:39 GMT Jorge Coloma 2009-02-18T14:11:39Z https://community.hpe.com/t5/proliant-servers-netservers/smart-array-disk-move/m-p/1058282#M16489 I have a proliant ML350 G4 with two disks configured in raid 1 with an smart array that is broken. Can I put this disks in a proliant DL380 with an smart array? The problem is that i will put the disks in another positions (on the original server are on 0 and 1 position, and i will put this in the new server on positions 2 and 3), just to start with the operating system of the dl380 and to make a emergency recoger of the data of the other server. Wed, 18 Feb 2009 14:11:39 GMT https://community.hpe.com/t5/proliant-servers-netservers/smart-array-disk-move/m-p/1058282#M16489 Jorge Coloma 2009-02-18T14:11:39Z https://community.hpe.com/t5/proliant-servers-netservers/smart-array-disk-move/m-p/1058283#M16490 Possibly yes.<BR /><BR />If smartarray is same generation like 5i, it will detect array config on drive.<BR /><BR />Be sure to load/use this drive array config in controller when it ask and you will be able to read data.<BR /><BR />Good luck. Tue, 24 Feb 2009 18:12:00 GMT https://community.hpe.com/t5/proliant-servers-netservers/smart-array-disk-move/m-p/1058283#M16490 Sylvain Gelinas 2 2009-02-24T18:12:00Z