https://community.hpe.com/t5/hpe-proliant-servers-netservers/modifying-pxe-boot-parameters-in-bios/m-p/1089335#M17148 On your DHCP server configure boot option 66 and boot option 67 for the scope(s). Thu, 18 Jun 2009 11:25:19 GMT Kedd Guyton 2009-06-18T11:25:19Z https://community.hpe.com/t5/hpe-proliant-servers-netservers/modifying-pxe-boot-parameters-in-bios/m-p/1089334#M17147 <BR /> In order to do a pxe boot, we have to connect the new DL385 server to the same LAN as PXE boot server for it to get pxe boot info. <BR /> <BR /> Is it possible to assign this PXE boot info from the console so that we do not have to physically connect to the PXE LAN segment? Wed, 17 Jun 2009 16:34:23 GMT https://community.hpe.com/t5/hpe-proliant-servers-netservers/modifying-pxe-boot-parameters-in-bios/m-p/1089334#M17147 Khanh Vo 2009-06-17T16:34:23Z https://community.hpe.com/t5/hpe-proliant-servers-netservers/modifying-pxe-boot-parameters-in-bios/m-p/1089335#M17148 On your DHCP server configure boot option 66 and boot option 67 for the scope(s). Thu, 18 Jun 2009 11:25:19 GMT https://community.hpe.com/t5/hpe-proliant-servers-netservers/modifying-pxe-boot-parameters-in-bios/m-p/1089335#M17148 Kedd Guyton 2009-06-18T11:25:19Z