https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117874#M17812 When I opend the System Managmend I saw that the NEC98431 had failed.Why is that? Is it becuase Ilo is not connected to the network?<BR /> <BR /> Sat, 07 Nov 2009 22:22:16 GMT N.Arif 2009-11-07T22:22:16Z https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117874#M17812 When I opend the System Managmend I saw that the NEC98431 had failed.Why is that? Is it becuase Ilo is not connected to the network?<BR /> <BR /> Sat, 07 Nov 2009 22:22:16 GMT https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117874#M17812 N.Arif 2009-11-07T22:22:16Z https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117875#M17813 Yes, that is the ILO Network Port! Connect it to the network, configure ILO and the failure remove Sun, 08 Nov 2009 10:21:28 GMT https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117875#M17813 Hense, Klaus 2009-11-08T10:21:28Z https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117876#M17814 If you are unable to connect the iLO to the network, the agent responsible for reporting the disconnected iLO's NIC can be disabled from Control Panel -&gt; HP Management Agents. Set the Remote Insight Information agent to Inactive. Mon, 09 Nov 2009 14:15:33 GMT https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/1117876#M17814 Kedd Guyton 2009-11-09T14:15:33Z https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/5494227#M19443 <P>ONce the Insight Agent is made inactive, i'm prompted to restart the management agents, if i reastart them, willl that kill any connections currently on the server? or cause any disruptions?</P> Fri, 13 Jan 2012 16:34:42 GMT https://community.hpe.com/t5/proliant-servers-netservers/failed-embedded-nec98431/m-p/5494227#M19443 lizreal 2012-01-13T16:34:42Z