topic Re: Smart Array B120i SSD TRIM in ProLiant Servers - Netservers

Smart Array B120i SSD TRIM

Justin Hindle — Thu, 21 May 2015 01:19:59 GMT

Hi,

Could anyone advise how or if the Smart Array B120i in a HP Gen8 Microserver handles TRIM with SSD hard drives in general or in a mirror?

Thanks

Justin

P.S. This thread has been moved from ProLiant Servers (ML,DL,SL) to ProLiant Servers - Netservers. - Hp Forum Moderator

Re: Smart Array B120i SSD TRIM

Suman_1978 — Tue, 19 May 2015 10:05:08 GMT

Hi,

Some where I read that HP SSD do not have TRIM command and instead they use "over-provisioning" and "wear leveling" techniques.

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=mmr_kc-0110765

Refer to page#5 in the below document.

http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01580706

As far as I understand, TRIM must be supported by Smart Array firmware and SSD firmware.

http://h30499.www3.hp.com/t5/ProLiant-Servers-Netservers/Smart-Array-P800-SSDs-and-ATA-cmd-TRIM-w-Windows-Server-2008/td-p/1129504

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers

Re: Smart Array B120i SSD TRIM

Justin Hindle — Tue, 19 May 2015 10:10:02 GMT

Hi Suman_1978

Thanks for the indepth reply, I'll finish what I'm working on and do some reading!!!

Do you know if your reply applies to non-HP SSDs it Intel SSDs?

Thanks

Justin

Re: Smart Array B120i SSD TRIM

Suman_1978 — Tue, 19 May 2015 10:27:23 GMT

Hi,

My reply was about HP SSD but in case of Intel SSD, even then the command has to go through HP Array Controller, so I guess it will not work.

You can try at your choice.

http://www.intel.com/support/ssdc/hpssd/sb/CS-031242.htm

Thank You!
I am a HP employee.

Useful Links for ProLiant Servers

Self Solve Options for ProLiant Servers

Re: Smart Array B120i SSD TRIM

elsevero — Sat, 17 Jun 2017 20:42:43 GMT

@Suman_1978: Will Crucial MX300 1TB SSD work with the Raid and HP ProLiant ML310e G8 v2 with Intel® Xeon® E3-1220v3 3.10GHz server ?