topic Re: Microserver Gen10 Drive Mounting Kit in ProLiant Servers - Netservers

Microserver Gen10 Drive Mounting Kit

ScoobyUK — Mon, 04 Dec 2017 13:58:44 GMT

We have a new Gen10 Microserver but no kit for installing 3.5" hard drives. Can anyone supply the part no. of the mounting rails please

Re: Microserver Gen10 Drive Mounting Kit

parnassus — Mon, 04 Dec 2017 15:02:06 GMT

If you are going to install 3,5" drives you don't need any rail mounting kits (drive carriers as on Gen8), just install four T-15 Torx screws (up to 16 are provided) on each drive's side holes and insert the drive as is on the corresponding bay...that's it, nothing more nothing less.

Eventually, see here.

Re: Microserver Gen10 Drive Mounting Kit

ScoobyUK — Tue, 05 Dec 2017 07:40:34 GMT

Thanks for this, I can see this now. Much appreciated

Re: Microserver Gen10 Drive Mounting Kit

Dan1011 — Sat, 09 Mar 2019 10:34:44 GMT

Hi,

is there any chance to get the 16 screws for mounting the hard drives into the shafts as spare parts? I've already asked the HPE support in Germany but they are not able to provide the screws as spare part. I've bought the microsever "used" from a reseller and the screws where not provided.

Thanks for support in advance.

Re: Microserver Gen10 Drive Mounting Kit

Jimmy Vance — Sun, 10 Mar 2019 23:52:33 GMT

I didn't see them listed on partsurfer. You can buy them online pretty cheap. Search for 'torx 8 6-32 desktop hard mounting screw' found one plce selling in lots of 20