topic Re: Firmware update of Intelligent Provisioning on Gen8 from USB / file - how? in ProLiant Servers - Netservers

Firmware update of Intelligent Provisioning on Gen8 from USB / file - how?

jw24 — Wed, 09 Aug 2017 21:28:00 GMT

I'm looking to upgrade my Gen8 to WS2016 so need to update Intelligent Provisioning (currently running 1.62.14). I've been through various threads and think I have everything I need to get going (I have downloaded both 1.64B and 2.5 versions of IP - both of which have been reported as working with WS2016).

My problem is I don't know how to upgrade from anything but online. I enter IP, click on Perform Maintenance > Firmware Update. The only option I then have is an online update, which is only 1.63 for some reason. How can I install one of the newer versions I have saved? I have mounted the file through the remote console and physically on a USB (I didn't make it a bootable USB, just literally dropped the ISO onto it).

Do I need to make a bootable ISO and boot from it to perform the FW update?

Thanks

Re: Firmware update of Intelligent Provisioning on Gen8 from USB / file - how?

Jimmy Vance — Wed, 09 Aug 2017 22:03:55 GMT

Version 1.xx is for Gen8 servers, 2.xx is for Gen9. If you have downloaded the IP recovery image, there is a USB utility included within the ISO image that will create a bootable USB key. You can also mount the ISO image via iLO if you have an iLO Advanced license (or trial license). Another option is to just boot from the OS media and install, then add the HPE drivers and software maually using the SPP when finished.

Re: Firmware update of Intelligent Provisioning on Gen8 from USB / file - how?

jw24 — Thu, 10 Aug 2017 21:57:13 GMT

Thanks for the response - I am now up and running on WS2016.

I can also confirm (as I have also read elsewhere) that firmware 2.5 is compatible with Gen8 servers.

Re: Firmware update of Intelligent Provisioning on Gen8 from USB / file - how?

Kezzz — Tue, 25 Dec 2018 00:45:12 GMT

I second that, as I just updated several BL460c Gen8 BladeSystems with Intelligent Provisioning 2.5, and it works perfectly.

Re: Firmware update of Intelligent Provisioning on Gen8 from USB / file - how?

Kezzz — Tue, 25 Dec 2018 02:40:40 GMT

... then as soon as I posted, I saw in several places that:

NOTE: The following servers and Intelligent Provisioning versions are supported:
• Gen8 supports Intelligent Provisioning 1.x
• Gen9 supports Intelligent Provisioning 2.x
• Gen10 supports Intelligent Provisioning 3.x