topic Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive in ProLiant Servers - Netservers

HPE Smart Array S100i SR Gen10 Replace Failed Drive

Scott-D — Mon, 14 Sep 2020 21:57:55 GMT

We have a Microserver and are using the HPE Smart Array S100i SR Gen10 RAID with a mirrored set. One of the drives is showing failed and I'm trying to figure out how to replace the failed drive and nothing is looking obvious? On other servers, we'd mark the drive as offline, remove it and replace it and it would rebuild. I just removed it from this server since I didn't see a way to take if offline. Once I pop in the new disk, it just shows it as available?

Can anyone shed some light? This is frustrating since it's not obvious!! Thanks a ton!!

Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive

SanjeevGoyal — Wed, 16 Sep 2020 08:57:43 GMT

Hello,

I hope the below documents will help you replace the failed hard disk.

https://support.hpe.com/hpesc/public/docDisplay?docId=c02551715

https://support.hpe.com/hpesc/public/docDisplay?docId=a00036944en_us&docLocale=en_US#N10487

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive

Scott-D — Wed, 16 Sep 2020 10:55:19 GMT

Sorry -- that didn't show me what I needed. Luckily I opened a case with HP. Apparently I needed to put the drive in the exact same spot that the failed one was previously in and then the auto-rebuild started and properly brought the RAID back to a functional level.

Thanks!

Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive

Torsten. — Thu, 17 Sep 2020 09:12:51 GMT

This is exactly what is written in the link above.

Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive

BSentosa — Tue, 16 Aug 2022 21:33:35 GMT

I know this is an old thread, but do you need to power down the OS or is the drive hotswappable?

Re: HPE Smart Array S100i SR Gen10 Replace Failed Drive

Sunitha_Mod — Mon, 22 Aug 2022 09:58:33 GMT

Hello @BSentosa,

Thank you for posting! Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and help you further.