topic Microserver Gen10 Display flickers in ProLiant Servers - Netservers

Microserver Gen10 Display flickers

JanneSe — Thu, 29 Sep 2022 09:59:17 GMT

I have a screen connected to Microserver's displayport (without adapters). Very often the screen starts to lose connection to computer and then turns back on in a few seconds frequency. This flickering may stop after a while or not (reboot usually helps). I have also tried another monitor and another cable without success.

OS is Server 2019 Essentials. Matrox driver is installed from HPE support page.

Re: Microserver Gen10 Display flickers

TVVJ — Wed, 28 Sep 2022 15:12:30 GMT

Hello,

As you have already swapped the monitor and the cables connecting to the server's check if the issue is present when the server is in RBSU mode. Restart the server and press key 'F9' during POST to launch it and check.

Regards,

Re: Microserver Gen10 Display flickers

JanneSe — Fri, 30 Sep 2022 12:14:18 GMT

Currently the displayport is totally dead. I made a support ticket and the server will be replaced.