topic Re: netserver lh3 setup nt4.0 problems in ProLiant Servers - Netservers

netserver lh3 setup nt4.0 problems

martin karaus — Wed, 26 Mar 2003 07:54:35 GMT

hello ,
I have the following problem.
I have a LH3 netserver and I would like to install windows nt 4.0 server-edition.
The lh3 was cleaned up from the former nt4.0 software ( company rule) , at the moment there is a 2,1 gb fat16 dos partition installed.
I downloaded from the website the nessesary drivers for symbios logic internal scsi and the hp netraid for nt4.0. I booted the system with the nt 4.0 boot disks and used the option to add manually the mass storage adapters( ide cdrom/ symbios logic and the hp netraid driver). but when I want to move onward , the setup tells me, there is no storage available. Unfortunately, I did not received the HP Netserver navigator CD nor Manuals ( I bought the LH3 for only 50??? ). the server was before the cleanup up and running . can somebody help ?
greetings martin

Re: netserver lh3 setup nt4.0 problems

CA698399 — Wed, 26 Mar 2003 18:29:46 GMT

Hi Martin,

Here are some related threads that might be helpful:
http://forums.itrc.hp.com/cm/QuestionAnswer/0,,0x78116049dbb6d611abdb0090277a778c,00.html
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x5e6042308663d611abdb0090277a778c,00.html
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x1bcf99f08a51d61190040090279cd0f9,00.html

Re: netserver lh3 setup nt4.0 problems

martin karaus — Wed, 26 Mar 2003 20:14:31 GMT

Thanks alot
your second link describes exactly my problem !!
greetings
martin