topic Re: Netserver e45 memory in ProLiant Servers - Netservers

Netserver e45 memory

CA722082 — Fri, 07 Dec 2001 11:39:28 GMT

What type of memory is needed in the Netserver e45? I see it is 72pin SIMM, but is it FPM or EDO? Is a particular speed necessary(60/70 nanosecond)? What is the maximum amount? I've inherited an E45 that has 4 SIMM slots occupied and 2 available with a total of 96MB. Would like to bring server up to 256mb RAM.

Re: Netserver e45 memory

CA592260 — Fri, 07 Dec 2001 15:47:36 GMT

FPM

live free or die
harry

Re: Netserver e45 memory

CA660377 — Fri, 07 Dec 2001 18:11:29 GMT

60ns ECC FPM SIMMs, added 2 at a time. Maximum 384MB / 6x64MB.

Re: Netserver e45 memory

Dominic Bernardi — Thu, 02 May 2002 23:57:45 GMT

My e45 uses according to its spec card,
36 bit, 60ns, fast page mode non-EDO.
This is very true, got the wrong type and had to source non-EDO. NB Install in each bank by pairs. No single simms. Also do you know why my e45 sees a 2.1gb when i have a 4.2 gb installed ?
Dom

Re: Netserver e45 memory

CA784599 — Sat, 04 May 2002 16:23:17 GMT

Be careful when you replace those memory chip, if are using win2k you may see the blue screen of death with an error code sorry I forgot the code number.