https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468566#M7232 I tried the 100mhz separately and it would not work. I would like confirmation that the 133mhz will work in this machine. Thu, 06 Jan 2005 22:34:23 GMT CA1226981 2005-01-06T22:34:23Z https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468564#M7230 I have an E60 450 PII with 128M Dimm. Specs say this should be a 100mhz, but the installed memory is 133mhz and a 100mhz expansion would not work. Will the standard serer 133mhz work with this machine? Mon, 20 Dec 2004 13:19:24 GMT https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468564#M7230 CA1226981 2004-12-20T13:19:24Z https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468565#M7231 Ron,<BR /><BR />The memory modules you use must be the same in order to use. I suspect that both will work separately but not together.<BR /><BR />I recommend using either HP or Kingston (KTH7155/256) memory.<BR /><BR />Hope this helps. Thu, 06 Jan 2005 21:33:52 GMT https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468565#M7231 CA1036363 2005-01-06T21:33:52Z https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468566#M7232 I tried the 100mhz separately and it would not work. I would like confirmation that the 133mhz will work in this machine. Thu, 06 Jan 2005 22:34:23 GMT https://community.hpe.com/t5/proliant-servers-netservers/netserver-e60-memory/m-p/468566#M7232 CA1226981 2005-01-06T22:34:23Z