topic Re: Netserver E-800 Beep Codes in ProLiant Servers - Netservers

Netserver E-800 Beep Codes

Eric Crane — Tue, 08 Feb 2005 22:16:31 GMT

I get 4 short beeps spaced about a second apart. Nothing else. None of the beep code lists I've found list this. Does anyone have any ideas?

Re: Netserver E-800 Beep Codes

CA859951 — Thu, 10 Feb 2005 11:34:27 GMT

Eric:

Do you get any video response? Anything on the screen?

4 short and no video sounds like System Timer failed. You would need to replace the M/B.

Hope this helps. -john

Re: Netserver E-800 Beep Codes

CA859951 — Thu, 10 Feb 2005 11:35:43 GMT

Have you tried to bench the server?

Remove all but 2 DIMM and no PCI cards... just k/b RAM and video?

Re: Netserver E-800 Beep Codes

Eric Crane — Sun, 13 Feb 2005 15:20:59 GMT

No video response. Everything except the RAM and Video are removed. What type of RAM does this MBoard use? Anything special?

Re: Netserver E-800 Beep Codes

Eric Crane — Mon, 14 Feb 2005 14:33:36 GMT

I have an answer on the memory which may be the soulution to my problem. The Netserver E800 uses only ECC memory, not conventional ram.