topic Re: LC 2000 server help in ProLiant Servers - Netservers

LC 2000 server help

matt_325 — Mon, 11 Jul 2005 10:19:34 GMT

I just got a LC2000 server and I'm tring to set it up for fun but I'm have a small problem. I cant get my hot swaps to show up under my computer. When I reboot the lights in the hot swap drive flicker but they stay green. I am running server 2000 raid card number is p3410.my scsi drves are ultra3
Thank you for any help

Re: LC 2000 server help

malvin drakley — Tue, 12 Jul 2005 06:53:01 GMT

Hi Matt have you tried looking through this manual

http://h200007.www2.hp.com/bc/docs/support/SupportManual/lpn10745/lpn10745.pdf

and the several others about the LC2000 on this page

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=110&prodTypeId=15351&prodSeriesId=50440

Cheers
malvin

Re: LC 2000 server help

matt_325 — Tue, 12 Jul 2005 07:51:37 GMT

Thank you for the guide I been looking for that so that was a big help.
I did fix my problem the 1st thing I did was updated the firmware and updated the raid driver to the latest then went into the device manager and under disk drives my card showed up. Now I checked my computer and still nothing showed up then it dawned on me I needed to format the drive under disk management after I did that my drives showed up. But I have a new problem I have 3 18.2 ultra3 SCSI drives and only 33.3 GB show up. I'm just glad the hard part is fixed :)
Thank you for the link to the manual

Re: LC 2000 server help

matt_325 — Tue, 12 Jul 2005 07:53:54 GMT

Oh ya I for got at the start up I pressed CTRL-m and went into the raid utility and toggled the drives to online.

Re: LC 2000 server help

Alicia White — Tue, 19 Jul 2005 23:28:01 GMT

About the entire space of the 3 drives not showing: you've probably set up the array as a RAID5.

In a RAID 5 array, the amount of space equivalent to 1 hard drive in the array will always be lost to parity (the information the RAID controller needs to have to rebuild the array should a drive fail). This "parity" information is striped across all the drives in the RAID 5 array, but is always equal to the size of one drive in the set, hence the apparent loss of space.

Alicia