https://community.hpe.com/t5/alpha-servers/problem-faced-in-image-backup/m-p/732510#M157 I faced the Image Backup problem in the Alpha server DS15. There are 2 messages keep on scrolling once I key in the following command:<BR /> backup/image dka0: mka100:cp00_sys.bck/label=cp0sys<BR /> <BR /> Below are the 2 messages keep on scrolling: <BR /> - System-I-mountver, DKA0: is offline, mount veification in progress.<BR /> - System-I-mountver, DKA0: has completed mount verification.<BR /> <BR /> What could be the problem for this?<BR /> Any solution for this? Tue, 26 Dec 2006 20:10:46 GMT Yeong 2006-12-26T20:10:46Z https://community.hpe.com/t5/alpha-servers/problem-faced-in-image-backup/m-p/732510#M157 I faced the Image Backup problem in the Alpha server DS15. There are 2 messages keep on scrolling once I key in the following command:<BR /> backup/image dka0: mka100:cp00_sys.bck/label=cp0sys<BR /> <BR /> Below are the 2 messages keep on scrolling: <BR /> - System-I-mountver, DKA0: is offline, mount veification in progress.<BR /> - System-I-mountver, DKA0: has completed mount verification.<BR /> <BR /> What could be the problem for this?<BR /> Any solution for this? Tue, 26 Dec 2006 20:10:46 GMT https://community.hpe.com/t5/alpha-servers/problem-faced-in-image-backup/m-p/732510#M157 Yeong 2006-12-26T20:10:46Z https://community.hpe.com/t5/alpha-servers/problem-faced-in-image-backup/m-p/732511#M158 This looks like a problem on the SCSI bus. Are all connectors correct and is termination valid? What does the error log say about it?<BR /><BR />The 'standard' recommendation is to put the tape on a extra SCSI bus for better performance, but mount verifications all over the place should not occur.<BR /><BR />regards Kalle<BR /> Thu, 11 Jan 2007 04:32:31 GMT https://community.hpe.com/t5/alpha-servers/problem-faced-in-image-backup/m-p/732511#M158 BR748713 2007-01-11T04:32:31Z