https://community.hpe.com/t5/alpha-servers/some-problem-with-ds10-box/m-p/955887#M178 Sorry for the late reply, How was your summer..<BR /><BR />PERR is a PCI parity error. in this case on PCI BUS 0, whick unfortunatley is all the internal devices and PCI slots in the DS10.<BR /><BR /> I see in the PCI slots there are 2 adapters, A DEPVZ the combo card that has the SCSI controller, 2D graphics and the Ethernet, and a Fibre HBA a KGPSA-DA.<BR /><BR />As a first Step reseat any PCI adapters for this error. It has been known to fix many issues with PCI parity errors. <BR /><BR />Brian <BR /><BR /><BR /><BR /><BR /> Tue, 04 Nov 2008 16:15:53 GMT B Corbin 2008-11-04T16:15:53Z https://community.hpe.com/t5/alpha-servers/some-problem-with-ds10-box/m-p/955886#M177 One of my DS10 box is giving some hardware problem, when the box is booting, i am getting the bellow message. Any one tell me what the bellow message indicates ?<BR /> <BR /> ** keyboard not plugged in...<BR /> 1280 Meg of system memory<BR /> probing hose 0, PCI<BR /> probing PCI-to-ISA bridge, bus 1<BR /> probing PCI-to-PCI bridge, hose 0 bus 2<BR /> bus 0, slot 9 -- ewa -- DE500-BA Network Controller<BR /> bus 0, slot 11 -- ewb -- DE500-BA Network Controller<BR /> bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE<BR /> bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE<BR /> bus 0, slot 14 -- pka -- NCR 53C895<BR /> bus 2, slot 4 -- pkb -- NCR 53C895<BR /> bus 2, slot 5 -- eia -- DE600-AA<BR /> bus 2, slot 6 -- vga -- Permedia - P2V Graphics Controller<BR /> bus 0, slot 16 -- pga -- FCA-2354<BR /> initializing GCT/FRU at 3ff42000<BR /> <BR /> Error detected by Pchip 0<BR /> PERROR = 0070bff6f4680005<BR /> Lost Error<BR /> PERR<BR /> <BR /> Mon, 26 May 2008 04:59:35 GMT https://community.hpe.com/t5/alpha-servers/some-problem-with-ds10-box/m-p/955886#M177 shashi kanth 2008-05-26T04:59:35Z https://community.hpe.com/t5/alpha-servers/some-problem-with-ds10-box/m-p/955887#M178 Sorry for the late reply, How was your summer..<BR /><BR />PERR is a PCI parity error. in this case on PCI BUS 0, whick unfortunatley is all the internal devices and PCI slots in the DS10.<BR /><BR /> I see in the PCI slots there are 2 adapters, A DEPVZ the combo card that has the SCSI controller, 2D graphics and the Ethernet, and a Fibre HBA a KGPSA-DA.<BR /><BR />As a first Step reseat any PCI adapters for this error. It has been known to fix many issues with PCI parity errors. <BR /><BR />Brian <BR /><BR /><BR /><BR /><BR /> Tue, 04 Nov 2008 16:15:53 GMT https://community.hpe.com/t5/alpha-servers/some-problem-with-ds10-box/m-p/955887#M178 B Corbin 2008-11-04T16:15:53Z