topic Alpha Server1200 in Alpha Servers

Alpha Server1200

Azamat — Mon, 23 Jan 2012 09:37:29 GMT

Hi, all
i`ve some problem with Alpha1200...
i just replaced mother board, `n` then this server don`t start Tru64 o/s. how i can configure the direction to boot hard disk?

-------------------------------

P.S. This Thread has been moved from Servers --> General to Servers --> Alpha Servers - Forum Moderator

Re: Alpha Server1200

Rob Leadbeater — Mon, 16 Jun 2008 15:11:01 GMT

Hi,

You'll have to reconfigure the various boot parameters...

The disks in your machine can be seen in the output of the command:

>>> show dev d

Assuming that the boot disk is dka0, then you'll need to set the boot device:

>>> set bootdef_dev dka0

You may also need to set the os_type and the OS flags:

>>> set os_type unix
>>> set boot_flags A

Hope this helps,

Regards,

Rob

Re: Alpha Server1200

Azamat — Tue, 17 Jun 2008 11:07:30 GMT

i tried this command show dev d, but nothing

and then i tried
>>> set bootdef_dev dka0
>>> set os_type unix
>>> set boot_flags A
>>> boot
but server goes to the restart

i tried all disks...

Re: Alpha Server1200

Rob Leadbeater — Tue, 17 Jun 2008 17:48:28 GMT

Hi,

Do you know what the boot disk is ?

If not, then it could be difficult to get things going.

If you don't see anything with show dev d, try "show device"

Cheers,

Rob

Re: Alpha Server1200

Azamat — Wed, 18 Jun 2008 03:26:19 GMT

yes, i tried show dev, `n` then i tried boot from all disks
>>boot dkb0
>>boot dkb100
>>boot dkb200
>>boot dkb300
>>boot dkb400

Re: Alpha Server1200

Azamat — Wed, 18 Jun 2008 03:47:05 GMT

one man, said me, that i need use ECU programm.
is it true?

Re: Alpha Server1200

Rob Leadbeater — Wed, 18 Jun 2008 09:57:18 GMT

Hi,

Can you post exactly what happens when the server tries to boot please...

It might also be useful to see the output of "show config"

Cheers,
Rob

Re: Alpha Server1200

Azamat — Wed, 18 Jun 2008 11:31:54 GMT

thank all you for council...
it`s alright