topic Re: "File exists" while adding disk. in HPE Ezmeral Software platform

"File exists" while adding disk.

CBENilsson — Tue, 25 Oct 2022 04:36:37 GMT

I had an issue with a disk that was marked as possibly bad after an incident. I removed the disk with mrconfig and ran fsck on it. Now when I'm trying to add it back I get the error message "Failed operation for disk /dev/sdj, File exists" which doesn't really point me to what I'm supposed to do to resolve the issue.

Re: "File exists" while adding disk.

Shishir_Prakash — Fri, 21 Oct 2022 16:24:30 GMT

check /opt/mapr/conf/disktab file . If there is a line with /dev/sdj then remove it.

Also, I assume you have created SPs with only one disk. If in case your SP consist of three disk or more then you will need to remove the relevent disks for that SP from disktab file.

Run below command to check what are the disks belongs to SP where disk /dev/sdj is attached. You will need to remove those disks entries from disktab file.

/opt/mapr/server/mrconfig sp list -v

=== Example===

In the output below I only have one SP (named as SP1) . This has only one disk /dev/sdb.

# /opt/mapr/server/mrconfig sp list -v
ListSPs resp: status 0:1
No. of SPs (1), totalsize 88667 MB, totalfree 74317 MB

SP 0: name SP1, Online, size 88667 MB, free 74317 MB, path /dev/sdb, log 200 MB, port 5660, guid 4ccb3788053b9c440060fcab1d01731a, clusterUuid -6819087817328921874--5199606154060414735, disks /dev/sdb, dare 0, label ssd:1

Re: "File exists" while adding disk.

CBENilsson — Tue, 08 Nov 2022 00:30:47 GMT

It worked great. Doesn't retain any data though, but that's what backups are for.

Re: "File exists" while adding disk.

tdunning — Tue, 08 Nov 2022 06:17:32 GMT

The replaced disks won't have any data, but the data will have been replicated elsewhere in the cluster.

Backups are still good, but not necessary in such a simple failure scenario.