https://community.hpe.com/t5/software-general/hc380-management-network/m-p/6934901#M102 <P>The basic solution uses either the 2x10G or 4x1G networking.&nbsp; For the 2X10G ALL traffic goes through EACH of the 10G ports (Management, vmotion, storage).&nbsp; For the 4x1G, some traffic goes through ONE of the 1G and the rest goes through another of the 1G, then the other two duplicate the first two.&nbsp;</P> Wed, 25 Jan 2017 18:20:40 GMT Diana_Z 2017-01-25T18:20:40Z https://community.hpe.com/t5/software-general/hc380-management-network/m-p/6932534#M101 <P>Hello all, in all of the HC380 training and user guides, they have the management going over the 10Gb interfaces.&nbsp; Isn't it best practice to utilize a minimum of 2 of the onboard 1Gb nics for the management network?&nbsp; Any clarification would be helpful.&nbsp; Thanks.</P> Tue, 17 Jan 2017 13:21:56 GMT https://community.hpe.com/t5/software-general/hc380-management-network/m-p/6932534#M101 RPMCanes 2017-01-17T13:21:56Z https://community.hpe.com/t5/software-general/hc380-management-network/m-p/6934901#M102 <P>The basic solution uses either the 2x10G or 4x1G networking.&nbsp; For the 2X10G ALL traffic goes through EACH of the 10G ports (Management, vmotion, storage).&nbsp; For the 4x1G, some traffic goes through ONE of the 1G and the rest goes through another of the 1G, then the other two duplicate the first two.&nbsp;</P> Wed, 25 Jan 2017 18:20:40 GMT https://community.hpe.com/t5/software-general/hc380-management-network/m-p/6934901#M102 Diana_Z 2017-01-25T18:20:40Z