ntp error on Hpe 5130

cdx_84 — Tue, 26 Apr 2022 14:30:24 GMT

Hello,

I have a problem on one of my Hpe 5130 when I try to set my ntp server.
My 2 ntp servers are well set up in my switch, but they are in a "configured" state and the synchronization is not done.

[SWITCH_XXX]display ntp-service sessions
source reference stra reach poll now offset delay disper
********************************************************************************
[5]10.X.XX.132 INIT 16 0 64 - 0.0000 0.0000 0.0000
[5]10.X.XX.110 INIT 16 0 64 - 0.0000 0.0000 0.0000
Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.
Total sessions: 2
[SWITCH_XXX]display clock
21:28:25 1 Tue 01/15/2013
Time Zone : 1 add 01:00:00
Summer Time : 1 02:00:00 March last Sunday 02:00:00 October last Sunday 01:00:00

Would you have an idea ?

Re: ntp error on Hpe 5130

Jyothiyash — Tue, 26 Apr 2022 12:19:50 GMT

Hello @cdx_84,

You may find this document useful to configure NTP on your 5130 switch

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00017784en_us

topic ntp error on Hpe 5130 in Software - General

ntp error on Hpe 5130

Re: ntp error on Hpe 5130