topic Moonshot node power and Links in Software - General

Moonshot node power and Links

tasumegam — Tue, 10 May 2022 01:34:23 GMT

Hi Everyone,

I'm new to Moonshot and am slowly learning my way through. One issue that's a bit tough to figure out is Linking the legacy m nodes which require the moonshot remote console administrator (mRCA). Both the mRCA and the target node has been started and the mRCA is in the correct slot to Link. On going to Link I get an error,

"There are no potential links available in the chassis."

I have tried the CLI and SET LINK also fails with this error message. Is there a way to diagnose this?

Re: Moonshot node power and Links

AmRa — Tue, 10 May 2022 01:27:39 GMT

Links page will not detect link-capable cartridge pairs if there were no established links since the chassis ac cycle. If this is the first time the user will create a link and there are no links created previously, the page will show message " There are no potential links available in the chassis" and the edit button will be greyed out. User can go to CLI to create the link. Once a link has been established, iLO GUI will let user create links from GUI.