topic Re: Radius on 1950 in Software - General

Radius on 1950

Alexandros86 — Fri, 29 Jul 2022 07:34:02 GMT

Hi i am new on HP i just worked until now only with Cisco and i have some questions about the radius configuration.

I have a 1950-48G-2SFP+-2XGT JG961A and i use this configuration:

radius scheme RADIUS
primary authentication 10.0.0.1 key simple Test!
primary accounting 10.0.0.1 key simple Test!
user-name-format without-domain

----------------------------------------------------

domain system
authentication login radius-scheme RADIUS local
authorization login radius-scheme RADIUS local
authentication default radius-scheme RADIUS local
authorization default radius-scheme RADIUS local

-----------------------------------

in Radius server there are two users one admin and one simple user. The admin can login according to the logs but the session is immediatly terminate..

Did i forget something ? i dont see any configuration about groups or privileg

Re: Radius on 1950

sbhat09 — Fri, 29 Jul 2022 07:38:05 GMT

Hello @Alexandros86,

Please check if you find this document useful - https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/15-18/5998-8152_wb_2920_asg/content/ch06s04.html

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

Re: Radius on 1950

Alexandros86 — Fri, 29 Jul 2022 07:43:38 GMT

the problem in my switch there is not a lot of commands for the aaa

[HPE]aaa ?
connection-recording Record connections initiated by the device as a login
client
device-id Specify the device identifier
nas-id NAS-ID configuration
session-limit Configure session limits

Re: Radius on 1950

sbhat09 — Mon, 01 Aug 2022 09:25:11 GMT

Hello @Alexandros86,

I don't have much experience on this. But I can help you with additional document references that may be useful to you:

https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8150_access_security_guide/content/c_Configuring_RADIUS_server_support_for_switch_services.html

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03550052

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

Re: Radius on 1950

Alexandros86 — Tue, 02 Aug 2022 06:45:54 GMT

i think the issue was in Radius Server now its working but the web is not working i can not login with http only with ssh.

any idea?

Re: Radius on 1950

sbhat09 — Tue, 02 Aug 2022 07:05:04 GMT

Hello @Alexandros86,

Is that the issue with port 80 (http)? Is port 80 open for communication?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

Re: Radius on 1950

Alexandros86 — Tue, 02 Aug 2022 07:07:50 GMT

yes the web is working but i can not login if i activate the radius,without the radius there is no issue.

Re: Radius on 1950

sbhat09 — Tue, 02 Aug 2022 07:13:18 GMT

Hello @Alexandros86,

I can't think of any other reason causing this. I welcome if anyone who has good experience on radius to share their thoughts.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

Re: Radius on 1950

Alexandros86 — Tue, 02 Aug 2022 07:15:08 GMT

thanks fr your time i will do more troubleshooting, i suppose maybe is missing something again in Radius