vme manager running on node 1 in UI while being active on node 2

Convergo — Tue, 05 May 2026 17:08:35 GMT

Hi,

On our VME cluster we moved the VME manager from host 1 to host 2. After reconfiguring the VME, the VME crashed and now we see an reconfiguring action in the history running forever. As a result we cant move the vm anymore with manage placement, and when putting the host in maintenance the VME crashed. When starting up the VME with virsh start [VME] it started however the VME manager believed he was running on host 1 in the UI and running on host 2 according to virsh list --all.

Is there a way to sync the information in the UI with the active configuration. I read about logging in on the VME and doing a sudo morpheus-ctl reconfigure, however not sure if that is the way to go.

Re: vme manager running on node 1 in UI while being active on node 2

DiegoDelgado — Wed, 06 May 2026 01:49:55 GMT

How long has it been in this state? It usually times out after 24 hours and you'll be back to normal

topic Re: vme manager running on node 1 in UI while being active on node 2 in HPE Morpheus VM Essentials Software

vme manager running on node 1 in UI while being active on node 2

Re: vme manager running on node 1 in UI while being active on node 2