topic Re: HPE VM Essentials installation - Network Configuration "Error" in HPE Morpheus VM Essentials Software

HPE VM Essentials installation - Network Configuration "Error"

staffsmatt — Fri, 01 Aug 2025 03:23:34 GMT

Hi,

I am just trying to install HPE Morpheus VM Essentials for evaluation purposes. I am following this guide:

https://support.hpe.com/hpesc/public/docDisplay?docId=sd00006472en_us&page=GUID-B96D6475-9834-4E0F-A08B-CB97F532B786.html

I have installed the product ok but when I go into NEtwork COnfiguration I get a small popup with the word "Error" on it and nothing else.

This is a development (physical server) with one ethernet port connected (no vlans or bonds set up just a standard ethernet card) - the card is working as I can access the server over SSH.

I probably should also say that I am by no means a linux expert, very much at the "Google what you want to do and change the command to suit" stage.

Thanks

Matt

Re: HPE VM Essentials installation - Network Configuration "Error"

PeterTzvetanov — Thu, 31 Jul 2025 18:37:35 GMT

Hi staffsmatt,

send a mail to hpe-sw-trial-vmessentials@hpe.com and we will have a look together.

Peter Tzvetanov

Support Engineer

Peter.Tzvetanov@hpe.com

Technical Support Phone Numbers

HPE Operations

You can manage your cases on HPE Support Center

Re: HPE VM Essentials installation - Network Configuration "Error"

staffsmatt — Fri, 01 Aug 2025 07:12:32 GMT

Thanks, I've sent that in.

Re: HPE VM Essentials installation - Network Configuration "Error"

tladyko123 — Fri, 05 Sep 2025 12:10:01 GMT

Any solution found? I've come acros the same issue...

Re: HPE VM Essentials installation - Network Configuration "Error"

PeterTzvetanov — Fri, 05 Sep 2025 15:35:43 GMT

Hi tladyko123,

feel free to send a mail to hpe-sw-trial-vmessentials@hpe.com and we will have a look together.

With regards

Peter Tzvetanov

Support Engineer

Peter.Tzvetanov@hpe.com

Technical Support Phone Numbers

HPE Operations

You can manage your cases on HPE Support Center