The NCU GUI is empty and no devices appear in the GUI.

VP_3 — Mon, 05 Oct 2009 07:07:49 GMT

Hello, we experiencing problem with Windows 2008 on rx8620. Network Utility is empty and no matter what NIC we are using, we may not TEAM adapters, since no NIC presented in GUI. Does anyone has solution for this ? http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=51400&swItem=MTX-6eb254d6e5f7405083620409a5&prodNameId=346370&swEnvOID=4023&swLang=13&taskId=135&mode=4&idx=1
has solution: Issue: The NCU GUI is empty and no devices appear in the GUI.
Resolution: You must upgrade to NDIS 6.0 miniport drivers from Smart Setup Media 6.0 or downloaded from http://www.hp.com.
but either this method is not working (we have latest SupportPack), or something must be done in unusual way.
Regards, Vladislavas

Re: The NCU GUI is empty and no devices appear in the GUI.

VP_3 — Mon, 05 Oct 2009 16:01:00 GMT

Only certain NIC are supported by Network utility. Intel Dual port is supported under Windows 2008