https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-9-7-removes-port-information-when/m-p/4509645#M11921 We are updating to 8.3 Smartstart and installing the network config utility as part of the install. Prior to this version we were able to see the slot and the port assignments. <BR /><BR />Now we are ONLY able to see the Slot number. Am I missing a button to enable this to display. Was it ommitted? <BR /><BR />Any help would be greatly appreciated.<BR /><BR />Larry Wed, 07 Oct 2009 14:34:04 GMT Larry McKain_1 2009-10-07T14:34:04Z https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-9-7-removes-port-information-when/m-p/4509645#M11921 We are updating to 8.3 Smartstart and installing the network config utility as part of the install. Prior to this version we were able to see the slot and the port assignments. <BR /><BR />Now we are ONLY able to see the Slot number. Am I missing a button to enable this to display. Was it ommitted? <BR /><BR />Any help would be greatly appreciated.<BR /><BR />Larry Wed, 07 Oct 2009 14:34:04 GMT https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-9-7-removes-port-information-when/m-p/4509645#M11921 Larry McKain_1 2009-10-07T14:34:04Z