https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-installed-failure/m-p/4692720#M12284 Hi experts,<BR /> I reinstall Windows 2008 in Superdome using recovery DVD 6.1 andSmartSetup 6.2, after that install Service Pack 2 and install Network Configuration Utility 9.70.7 but failed. The error is "The installation procedure did not complete successfully. An error occurred during the setup process.". After that, I launch NCU and got the message "RaisePropertyUI Failed: 0x80004002", please help. Wed, 29 Sep 2010 08:10:29 GMT Dennis-Lee 2010-09-29T08:10:29Z https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-installed-failure/m-p/4692720#M12284 Hi experts,<BR /> I reinstall Windows 2008 in Superdome using recovery DVD 6.1 andSmartSetup 6.2, after that install Service Pack 2 and install Network Configuration Utility 9.70.7 but failed. The error is "The installation procedure did not complete successfully. An error occurred during the setup process.". After that, I launch NCU and got the message "RaisePropertyUI Failed: 0x80004002", please help. Wed, 29 Sep 2010 08:10:29 GMT https://community.hpe.com/t5/operating-system-microsoft/network-configuration-utility-installed-failure/m-p/4692720#M12284 Dennis-Lee 2010-09-29T08:10:29Z