topic Re: DL140 G2 teaming in Operating System - Microsoft

DL140 G2 teaming

Georgiy Prykhnenko — Tue, 16 Jun 2009 14:51:37 GMT

I have DL140 G2 server and Windows 2008 x64 installed. Who knows how to turn on network adapter teaming?
Broadcom NetXtreme Gigabit Ethernet.

Re: DL140 G2 teaming

Lmm_1 — Tue, 16 Jun 2009 20:23:43 GMT

Network configuration Utility can be downloaded here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=455149&prodNameId=3285483&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-21d2d1a4ad0e4d4e866c051ce0

The following whitpaper will show you how to setup the team:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01415139/c01415139.pdf

Re: DL140 G2 teaming

Georgiy Prykhnenko — Wed, 17 Jun 2009 09:50:18 GMT

Unfortunately, I cannot install this software. It tells me about error, this software doesn't match with operation system and/or firmware version. I tried on Windows server 2003 and 2008, x32 and x64.

Re: DL140 G2 teaming

Lmm_1 — Wed, 17 Jun 2009 12:24:36 GMT

DL140 G2 doesnt support Win2008 according to the quickspecs.

Re: DL140 G2 teaming

Georgiy Prykhnenko — Wed, 17 Jun 2009 13:02:51 GMT

I know, but successfully installed windows 2008 and have found network adapter driver.
I cannot create team, any on 2008 any on 2003.

Re: DL140 G2 teaming

Lmm_1 — Wed, 17 Jun 2009 13:12:54 GMT

Try this:

- Download the Network Configuration Utility.
- Use WinZIP to extract the NCU files.
- Select one of the local area network connections, and then select Properties. Click Install.
- Select the Protocol option, and then click the Add button.
- Select the Browse option, point to the directory where the extracted NCU files are located, and let the system complete the installation.

Once the installation is complete, the following files, which are located where the NCU files were extracted, need to be copied to %systemroot%\system32:
- NALicense.exe
- HQNALic.dll
- HQPELic.dll
- NALICENSE.HLP

--------------------------------------------------------------------------------

Re: DL140 G2 teaming

Georgiy Prykhnenko — Thu, 18 Jun 2009 06:37:59 GMT

It's solved!!!
For Broadcom network adapter you have to use Broadcom Advanced Control Suite 3.
You can download it from http://www.broadcom.com/support/ethernet_nic/driver-sla.php?driver=NX2-Mgmt-x86-64.
It works on windows server 2003 and 2008, x32 and x64.

Re: DL140 G2 teaming

Georgiy Prykhnenko — Thu, 18 Jun 2009 06:41:09 GMT

I'm sorry, from here:
http://www.broadcom.com/support/ethernet_nic/driver-sla.php?driver=NX2-Mgmt-x86-64

Re: DL140 G2 teaming

ibarragan — Thu, 25 Aug 2011 21:40:38 GMT

Sir, I am trying to install Windows 2008 Enterprise x32 on a DL140 G2.

I select the correct OS on the installer DVD, agree, format one of the drives and hit next.

I get "Windows could not prepare the partition selected for installation."

You said you sucessfully installed 2008 x64. How did you get past this, is it a disk driver problem?

Thank you.

Re: DL140 G2 teaming

Dennis Handly — Fri, 26 Aug 2011 21:35:28 GMT

>I get "Windows could not prepare the partition selected for installation."

(You should really start your own topic. The original topic was about network drivers and yours is about disks.)